Cheapest Price Cold Rolled or Cold Drawn Seamless Carbon Steel or Alloy Steel Honed Tube for Hydraulic Cylinder Barrel

Short Description:

SAE 1020 Precision Seamless Steel Pipe is made through bright annealing or special cold rolling

processes.So SAE 1020 Precision Seamless Steel Pipe is a kind of seamless steel pipe which is designed with several advantages:

1.Inside and outside surface no oxide coating;

2. Bear high pressure, no leaking;

3.Surface smooth;

4.No reformation in cold bending, no cracks during flaring test, and flattening test.

5.Small tolerance ,within+/-0.05mm

With these advantages it is widely used for automobiles, motorcycles, electric power, machinery, hydraulic accessories, bearings, pneumatic components, oil cylinders, coal mines, transportation, boiler equipment, pipelines, engineering etc.


  • :
  • :
  • :
  • Product Detail

    Product Tags

    We’ve been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for Cheapest Price Cold Rolled or Cold Drawn Seamless Carbon Steel or Alloy Steel Honed Tube for Hydraulic Cylinder Barrel, Our main objectives are to deliver our consumers worldwide with high quality, competitive selling price, satisfied delivery and outstanding providers.
    We’ve been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for China Seamless Carbon Pipe and Honed Tube, We aim to become the modern enterprise with the commercial ideal of “Sincerity and confidence” and with the aim of “Offering customers the most sincere services and best quality products”. We sincerely ask for your unchanged support and appreciate your kind advice and guidance.

    Dimensions : ASTM, ASME and API

    Size : 10 mm OD to 89 mm OD

    Wall Thickness : 1 mm to 8 mm

    Length : Single Random, Double Random & Required Length

    Schedules : SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules

    Form : Round, Square, Rectangular, Hydraulic Etc

    End : Plain End, Beveled End, Treaded

    End Protection : Plastic Caps

    Grade

    C

    Mn

    Fe

    P

    S

    SAE 1020

    0.170 – 0.230

    0.300 – 0.600

    99.08 – 99.53

    ≤ 0.040

    ≤ 0.050

    Grade

    Tensile Strength

    Yield Strength

    Elongation

    AISI 1020

    380 MPa, 55100 psi

    165 MPa, psi 29700

    25%

    High dimensional accuracy for inside and outside diameters

    Extremely limited wall thickness tolerances

    Reduced eccentricity

    Smooth drawn surface

    Increased strength values due to cold forming

    Tightly staggered range of dimensions

    Customized heat treatment

    Pipe Size is specified with two non-dimensional numbers:

    Nominal Pipe Size (NPS) for diameter based on inches.

    Schedule Number (SCH to specify the wall thickness of the Pipe.

    Both the size and schedule are required to accurately specify a particular piece of pipe.

    Nominal Pipe Size (NPS) is the current North American Set of standard sizes for pipes used for high and low pressures and temperatures. A further discussion of this is here.

    Iron Pipe Size (IPS) was an earlier standard than NPS to designate the size. The size was the approximate inside diameter of the pipe in inches. Each pipe had one thickness, named (STD) Standard or (STD.WT.) Standard Weight. There were only 3 wall thicknesses at the time. In March 1927, the American Standards Association created a system that designated wall thickness based on smaller steps between sizes and introduced Nominal Pipe Size which replaced Iron Pipe Size.

    Schedule Number for wall thickness ranges from SCH 5, 5S, 10, 10S, 20, 30, 40, 40S, 60, 80, 80S, 100, 120, 140, 160, STD, XS (Extra Strong) AND XXS (Double Extra Strong).

    Pipe and Tubing Terms of Interest

    BPE – Black Plain End Pipe

    BTC – Black Threaded & Coupled

    GPE – Galvanized Plain End

    GTC – Galvanized Threaded & Coupled

    TOE – Threaded One End

     Pipe Coatings & Finishes:

    Galvanized – Covered with a protective zinc coating on steel to prevent the material from rusting. The process can be hot-dip-galvanizing where the material is dipped in molten zinc or Electro-Galvanized where the steel sheet from which the pipe is made was galvanized during production by an electro-chemical reaction.

    Uncoated – Uncoated Pipe

    Black Coated – Coated with a dark colored iron-oxide

    Red Primed – Red Oxide Primed used as a base coat for ferrous metals, gives iron and steel surfaces a layer of protection

    precision steel tubing
    precision seamless steel tube
    precision seamless steel pipe
    We’ve been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for Cheapest Price Cold Rolled or Cold Drawn Seamless Carbon Steel or Alloy Steel Honed Tube for Hydraulic Cylinder Barrel, Our main objectives are to deliver our consumers worldwide with high quality, competitive selling price, satisfied delivery and outstanding providers.
    Cheapest Price China Seamless Carbon Pipe and Honed Tube, We aim to become the modern enterprise with the commercial ideal of “Sincerity and confidence” and with the aim of “Offering customers the most sincere services and best quality products”. We sincerely ask for your unchanged support and appreciate your kind advice and guidance.


  • Previous:
  • Next:

  • Related Products