Factory Cheap Hot A106 Carbon Steel Pipe with 150*6 with 5.8 Length
Short Description:
27SiMn steel pipes are widely used in automobile, petroleum, chemical and shipping industries. 27SiMn steel pipe is normalized and tempered, and coated with phosphate inside and outside. This steel pipe is mainly used in the quenched and tempered state to manufacture hot stamping parts (hydraulic parts) requiring high toughness and wear resistance, and hot stamping parts requiring high toughness and wear resistance.
27SiMn seamless steel pipe has high hardenability, the critical hardenability diameter in water is 8~22mm, good machinability, medium cold deformation plasticity and weldability; In addition, the toughness of the steel pipe is not much reduced during heat treatment, but it has quite high strength and wear resistance, especially in water quenching.
We often stay with the principle “Quality Very first, Prestige Supreme”. We have been fully committed to supplying our consumers with competitively priced high-quality goods, prompt delivery and skilled provider for Factory Cheap Hot A106 Carbon Steel Pipe with 150*6 with 5.8 Length, “Making the Products and solutions of Large Quality” may be the everlasting aim of our organization. We make unremitting efforts to recognize the intention of “We Will Always Keep in Pace with all the Time”.
We often stay with the principle “Quality Very first, Prestige Supreme”. We have been fully committed to supplying our consumers with competitively priced high-quality goods, prompt delivery and skilled provider for China Seamless Pipe and Carbon Pipe, With the development and enlargement of mass clients abroad, now we have set up cooperative relationships with many major brands. We have our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the “quality first, customer first, We are provideing high-quality, low-cost products and first-class service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.
|
Elements |
Min.（≥） |
Max.（≤） |
|
C |
0.24 |
0.32 |
|
Si |
1.10 |
1.4 |
|
Mn |
1.10 |
1.4 |
|
P |
|
0.035 |
|
S |
|
0.035 |
|
Cu |
|
0.3 |
|
Cr |
|
0.3 |
|
Ni |
|
0.3 |
|
Mo |
|
0.15 |
|
Tensile strength |
565～855 |
σb/MPa |
|
Yield Strength |
200 |
σ 0.2 ≥/MPa |
|
Elongation |
14 |
δ5≥(％) |
|
ψ |
- |
ψ≥(％) |
|
Akv |
- |
Akv≥/J |
|
HBS |
051～698 |
- |
|
HRC |
30 |
|
Thermal expansion |
68-30 |
e-6/K |
|
Thermal conductivity |
93-72 |
W/m.K |
|
Specific heat |
450-460 |
J/kg.K |
|
Melting temperature |
2384-8458 |
째C |
|
Density |
2244-1217 |
kg/m3 |
|
Resistivity |
0.50-0.60 |
Ohm.mm2/m |
|
Annealing |
Quenching |
Tempering |
Normalizing |
Q & T |
|
√ |
√ |
√ |
√ |
√ |
We often stay with the principle “Quality Very first, Prestige Supreme”. We have been fully committed to supplying our consumers with competitively priced high-quality goods, prompt delivery and skilled provider for Factory Cheap Hot A106 Carbon Steel Pipe with 150*6 with 5.8 Length, “Making the Products and solutions of Large Quality” may be the everlasting aim of our organization. We make unremitting efforts to recognize the intention of “We Will Always Keep in Pace with all the Time”.
Factory Cheap Hot China Seamless Pipe and Carbon Pipe, With the development and enlargement of mass clients abroad, now we have set up cooperative relationships with many major brands. We have our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the “quality first, customer first, We are provideing high-quality, low-cost products and first-class service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.
