Good Quality Building Material Strength Finishing NM360 Hot Rolled High Yield Wear Resistant Steel Plate
Short Description:
NM360 steel plate is mainly to provide protection in occasions or parts where wear resistance is needed, so that the life of the equipment is longer, reduce the maintenance downtime caused by maintenance, and correspondingly reduce the investment of funds.
We’ve been also focusing on improving upon the stuff management and QC program to make sure that we could hold fantastic gain in the fiercely-competitive enterprise for Good Quality Building Material Strength Finishing NM360 Hot Rolled High Yield Wear Resistant Steel Plate, Honesty is our principle, expert operation is our perform, support is our goal, and customers’ fulfillment is our future!
We’ve been also focusing on improving upon the stuff management and QC program to make sure that we could hold fantastic gain in the fiercely-competitive enterprise for China NM360 Wear Resistant Steel Plate, Our company sets up several departments, including production department, sales department, quality control department and sevice center,etc. only for accomplish the good-quality product to meet customer’s demand, all of our goods have been strictly inspected before shipment. We always think about the question on the side of the customers,because you win,we win!
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Ni |
B |
|
NM360 |
≤0.17 |
≤0.50 |
≤1.5 |
≤0.025 |
≤0.015 |
≤0.70 |
≤0.40 |
≤0.50 |
≤0.005 |
|
Thickness/mm |
ReL /MPa |
Rm /MPa |
A/% |
Hardness HBW10/3000 |
Impact -20℃/J |
|
20 |
1050 |
1160 |
19 |
360 |
65 |
|
25 |
1020 |
1180 |
18.5 |
375 |
52 |
|
30 |
1040 |
1180 |
17 |
369 |
65 |
|
40 |
1020 |
1160 |
18 |
368 |
68 |
Gas Cutting Characteristics of NM360 Wear Resistant Steel:
Gas Cutting Processing is allowed. Applying high pressure gas and low cutting speed to prevent split in cutting area. When cutting outside, preheating temperature 60 -90℃ in cutting area with flame spraying gun be recommended before the cutting.
Machining Characteristics of NM360 Wear Resistant Steel:
Cutting and Shearing Property of the plate perform well. Proper feed amount and feed rate should be selected according to hardness of plate and cutting tool. The tools’ materials usually are high speed steel or cemented carbide, for cutting and polishing, carbide-coated tool is demanded.
We’ve been also focusing on improving upon the stuff management and QC program to make sure that we could hold fantastic gain in the fiercely-competitive enterprise.
Good Quality Building Material Strength Finishing NM360 Hot Rolled High Yield Wear Resistant Steel Plate
Honesty is our principle, expert operation is our perform, support is our goal, and customers’ fulfillment is our future!
China NM360 Wear Resistant Steel Plate
Our company sets up several departments, including production department, sales department, quality control department and sevice center,etc. only for accomplish the good-quality product to meet customer’s demand, all of our goods have been strictly inspected before shipment. We always think about the question on the side of the customers,because you win,we win!
