High Definition Carbon Seamless Steel Boiler Pipe – DIN 17175 ST45.8 Seamless Steel Tubes – Haihui
Short Description:
High Definition Carbon Seamless Steel Boiler Pipe – DIN 17175 ST45.8 Seamless Steel Tubes – Haihui Detail:
Manufacturing: Seamless Process.
External dimensions: 14mm-711mm.
Wall thickness: 2mm-60mm.
Length: Fixed length (6m, 9m, 12m, 24m) or normal length (5-12m).
Ends: Flat, Beveled, Stepped.
Manufacturing Method
DIN 17175 St45.8 seamless steel pipes can be produced by hot rolling, cold rolling, hot pressing, hot drawing or cold drawing.
Steel pipes can be smelted in an open hearth or electric furnace according to the oxygen blow method, and all steel should be cast statically.
Availability
17175 St45.8 seamless steel pipe will be delivered with proper heat treatment. Heat treatment includes:
- Normalization.
- Annealing.
- Tempering; from the quenching temperature, it is not cold, but tempered.
- Adjust mass by isothermal transformation method.
|
Steel Grade |
Thermal processing ℃ | Normalizing℃ | Tempering | ||
| Grade | Material number | Quenching temperature ℃ | Tempering temperature ℃ | ||
| St45.8 | 1.0405 | 1100 to 850°C | 870-900 | – | – |
| Standard:DIN 17175 | Grade | Chemical composition(%) | |||||
| C | Si | Mn | P、S | Cr | Mo | ||
| St45.8 | ≤0.21 | 0.10-0.35 | 0.40-1.20 | ≤0.030 | / | / | |
| Grade | Tensile Strength(MPa) | Yield Strength(MPa) | Elongation(%) |
| St45.8 | 410-530 | ≥255 | ≥21 |
A thin sheet should be taken at the top end of each round or square bar ingot for a pickling test to determine if the top end is adequately cut. Ultrasonic testing can also be performed on the shrinkage hole as selected by the supplier.
Test:
Chemical composition verification test
hydrostatictest
Tensile test
Notched impact test
Yield strength test
Ring test
Nondestructive testing
Tube Flag
All steel pipes submitted for testing and acceptance shall be marked on the left and right sides of the pipe end at 300 mm. The mark is usually a number. Thin-walled tubes can also be used in other forms.
Marking and ordering
The steel grade or material number should be written to the abbreviation of the product as shown in the following example:
Example 1:
A DIN 17175 outer diameter 63mm, wall thickness 2.5 mm mm steel grade ST45.8 material, number 1.03 0 5 seamless steel pipe whose name is written: steel pipe DIN 17175-ST45.8 – 63 × 2.5 or steel pipe DIN 17175 -1.0305 – 63 × 2 . 5.
Product detail pictures:
Related Product Guide:
In order to best meet client's needs, all of our operations are strictly performed in line with our motto "High Quality, Competitive Price, Fast Service" for High Definition Carbon Seamless Steel Boiler Pipe – DIN 17175 ST45.8 Seamless Steel Tubes – Haihui, The product will supply to all over the world, such as: Sao Paulo, Rotterdam, Singapore, We have more than 10 years exported experience and our products have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
By Dorothy from San Francisco - 2017.06.16 18:23
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
By Mark from Somalia - 2017.10.13 10:47
