High Quality Carbon Seamless Steel Pipe - GB8163 Line Steel Pipe Seamless Steel Pipe – Haihui
Short Description:
High Quality Carbon Seamless Steel Pipe - GB8163 Line Steel Pipe Seamless Steel Pipe – Haihui Detail:
Compared with solid steel such as round steel, the steel pipe is light in weight when the bending and torsion strength are the same. It is an economical cross-section steel and is widely used to manufacture structural parts and mechanical parts, such as oil drill pipe, automobile transmission shaft, bicycle frame and steel scaffold used in construction. Manufacturing ring-shaped parts with steel pipes can improve the utilization rate of materials, simplify the manufacturing process, and save materials and processing hours, such as rolling bearing rings and Jack sleeves. At present, steel pipes have been widely used for manufacturing. Steel pipe is also an indispensable material for all kinds of conventional weapons. The barrel and barrel of guns are made of steel pipe. Steel pipes can be divided into round pipes and special-shaped pipes according to different cross-sectional areas and shapes. Since the circular area is the largest under the condition of equal circumference, more fluid can be transported by circular pipes. In addition, when the ring section is subjected to internal or external radial pressure, the force is more uniform. Therefore, the vast majority of steel pipes are round pipes.
Standard: GB/T8163.
Main Steel Tube Grade: 10, 20, Q345, etc.
Other grades can also be provided after consulting with customers.
| Standard | Grade | Chemical Composition % | ||||||
| C | Si | Mn | P, S | Cr | Ni | Cu | ||
| GB/T8163 | 10 | 0.07-0.14 | 0.17-0.37 | 0.35-0.65 | ≤0.035 | ≤0.15 | ≤0.25 | ≤0.25 |
| 20 | 0.17-0.24 | 0.17-0.37 | 0.35-0.65 | ≤0.035 | ≤0.25 | ≤0.25 | ≤0.25 | |
| Q345 | 0.12-0.20 | 0.20-0.55 | 1.20-1.60 | ≤0.045 | / | / | / | |
| Standard | Grade | Mechanical Properties | ||
| Tensile Strength MPa | Yield Strength MPa | Elongation % | ||
| GB/T8163 | 10 | 335-475 | ≥205 | ≥24 |
| 20 | 410-550 | ≥245 | ≥20 | |
| Q345 | 490-665 | ≥325 | ≥21 | |
|
Standard |
Grade |
Tensile Strength(MPa) |
Yield Strength(MPa) |
Elongation(%) |
|
DIN 17175 |
St35.8 |
360-480 |
≥235 |
≥25 |
Hot rolling (extruding seamless steel pipe): round tube blank → heating → piercing → three roll cross rolling, continuous rolling or extrusion → pipe stripping → sizing (or reducing) → cooling → blank tube → straightening → hydrostatic test (or flaw detection) → marking → warehousing.
Cold drawn (rolled) seamless steel pipe: round tube billet → heating → perforation → heading → annealing → pickling → oil coating (copper plating) → multi pass cold drawing (cold rolling) → billet → heat treatment → straightening → hydrostatic test (flaw detection) → marking → warehousing.
UT(Ultrasonic examination).
AR(As Hot Rolled only).
TMCP(Thermal Mechanical Control Processing).
N(Normalied).
Q+T(Quenched and Tempered).
Z Direction Test(Z15,Z25,Z35).
Charpy V-Notch Impact Test.
The Third Party Test (such as SGS Test).
Coated or Shot Blasting and Painting.
Product detail pictures:
Related Product Guide:
As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for High Quality Carbon Seamless Steel Pipe - GB8163 Line Steel Pipe Seamless Steel Pipe – Haihui, The product will supply to all over the world, such as: Pretoria, azerbaijan, Accra, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Leona from Qatar - 2017.04.28 15:45
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Barbara from Doha - 2017.09.30 16:36
