High QualityA53 Gr. B/A106 Gr.b, Black Carbon Hollow Section Rectangular and Round Steel Pipe
Short Description:
ASTM A53 pipe (also known as ASME SA53 pipe) is used for mechanical and pressure applications and can also be used for general purpose steam, water, gas and air line piping.
Seamless Steel Tubes For Structural Purposes, Seamless Steel Tubes For Mechanical Structures In GB/8162-2008 Standard. Material Include High-Quality Carbon Steel And Low Alloy Steel,Such As 10,20,35,45 And Q345,Q460,Q490,42CrMo,35CrMo.
Application: Mechanical and pressure use, also for conveying steam, water, gas, etc.
With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for High QualityA53 Gr. B/A106 Gr.b, Black Carbon Hollow Section Rectangular and Round Steel Pipe, Our solutions are regularly supplied to many Groups and lots of Factories. Meanwhile, our solutions are sold for the USA, Italy, Singapore, Malaysia, Russia, Poland, as well as Middle East.
With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for China Carbon Steel Pipe, In order to meet the increasing requirement of customers both home and aboard, we are going to keep carrying forward the enterprise spirit of “Quality, Creativity, Efficiency and Credit” and strive to top the current trend and lead fashion. We warmly welcome you to visit our company and make cooperation.
For mechanical and pressure use, and also for transporting steam, water, gas and etc.
Mill test certificates will be issued according to EN10204/3.1B.
ASTM A53 pipe (also referred to as ASME SA53 pipe) is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas, and air lines. It is suitable for welding, and suitable for forming operations involving coiling, bending, and flanging, subject to certain qualifications.
Materials and Manufacture
The steel for both seamless and welded pipe shall be made by one or more of the following processes: open-hearth, electric furnace, or basic-oxygen. The weld seam of electric-resistance welded pipe in Grade B shall be heat treated after welding.
Applications: heat exchangers, condensers, heat transfer equipment and similar pipes.
DN — Nominal Diameter
NPS —Nominal Pipe Size
O.D.: 6.0mm – 610 mm
W.T.: 1mm – 120 mm
Length: max 12000mm
|
Grade |
C |
Mn |
P |
S |
Cr |
Mo |
Cu |
Ni |
V |
|
Grade A |
≤0.25 |
≤0.95 |
≤0.05 |
≤0.045 |
≤0.40 |
≤0.15 |
≤0.40 |
≤0.40 |
≤0.08 |
|
Grade B |
≤0.30 |
≤1.20 |
≤0.05 |
≤0.045 |
≤0.40 |
≤0.15 |
≤0.50 |
≤0.40 |
≤0.08 |
|
Grade |
Rm Mpa Tensile Strength |
Mpa Yield Point |
Elongation |
Delivery Condition |
|
A |
≥330 |
≥205 |
20 |
Annealed |
|
B |
≥415 |
≥240 |
20 |
Annealed |
A53 Grade B Seamless steel pipe is our most polar product under this specification and A53 pipe is commonly dual certified to A106 B Seamless pipe.
A53 pipe comes in three types (F, E, S) and two grades (A, B).
A53 Type E has an electric resistance weld (Grades A and B).
A53 Type S is a seamless pipe and found in Grades A and B).
A53 Type F is manufactured with a furnace butt weld or may have a continuous weld (Grade A only).
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthy delivery or as requested.
Both ends of each tube will indicate the order no., heat no., dimensions, weight and bundles or as requested.
With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for Manufacturer of High Quality and Low Price A53 Gr. B/A106 Gr.b, Black Carbon Hollow Section Rectangular and Round Steel Pipe, Our solutions are regularly supplied to many Groups and lots of Factories. Meanwhile, our solutions are sold for the USA, Italy, Singapore, Malaysia, Russia, Poland, as well as Middle East.
Manufacturer of China Carbon and Steel Pipe, In order to meet the increasing requirement of customers both home and aboard, we are going to keep carrying forward the enterprise spirit of “Quality, Creativity, Efficiency and Credit” and strive to top the current trend and lead fashion. We warmly welcome you to visit our company and make cooperation.
