Online Exporter NM360 Wear Resistant Steel Plate
Short Description:
NM360 steel plate is mainly to provide protection in occasions or parts where wear resistance is needed, so that the life of the equipment is longer, reduce the maintenance downtime caused by maintenance, and correspondingly reduce the investment of funds.
As for aggressive price ranges, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such high-quality at such price ranges we’re the lowest around for Online Exporter NM360 Wear Resistant Steel Plate, Our highly specialized process eliminates the component failure and offers our customers unvarying quality, allowing us to control cost, plan capacity and maintain consistent on time delivery.
As for aggressive price ranges, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such high-quality at such price ranges we’re the lowest around for China NM360 Wear Resistant Steel Plate, Since the establishment of our company, we’ve realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down all those barriers to ensure you get what you want to the level you expect, when you want it.
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Ni |
B |
NM360 |
≤0.17 |
≤0.50 |
≤1.5 |
≤0.025 |
≤0.015 |
≤0.70 |
≤0.40 |
≤0.50 |
≤0.005 |
Thickness/mm |
ReL /MPa |
Rm /MPa |
A/% |
Hardness HBW10/3000 |
Impact -20℃/J |
20 |
1050 |
1160 |
19 |
360 |
65 |
25 |
1020 |
1180 |
18.5 |
375 |
52 |
30 |
1040 |
1180 |
17 |
369 |
65 |
40 |
1020 |
1160 |
18 |
368 |
68 |
Gas Cutting Characteristics of NM360 Wear Resistant Steel:
Gas Cutting Processing is allowed. Applying high pressure gas and low cutting speed to prevent split in cutting area. When cutting outside, preheating temperature 60 -90℃ in cutting area with flame spraying gun be recommended before the cutting.
Machining Characteristics of NM360 Wear Resistant Steel:
Cutting and Shearing Property of the plate perform well. Proper feed amount and feed rate should be selected according to hardness of plate and cutting tool. The tools’ materials usually are high speed steel or cemented carbide, for cutting and polishing, carbide-coated tool is demanded.
As for aggressive price ranges, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such high-quality at such price ranges we’re the lowest around.
Online Exporter NM360 Wear Resistant Steel Plate
Our highly specialized process eliminates the component failure and offers our customers unvarying quality, allowing us to control cost, plan capacity and maintain consistent on time delivery.
China NM360 Wear Resistant Steel Plate
Since the establishment of our company, we’ve realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down all those barriers to ensure you get what you want to the level you expect, when you want it.