PriceList For Schedule 40 Carbon Black Steel Pipe - DIN 17175 ST45.8 Seamless Steel Tubes – Haihui
Short Description:
PriceList For Schedule 40 Carbon Black Steel Pipe - DIN 17175 ST45.8 Seamless Steel Tubes – Haihui Detail:
Manufacturing: Seamless Process.
External dimensions: 14mm-711mm.
Wall thickness: 2mm-60mm.
Length: Fixed length (6m, 9m, 12m, 24m) or normal length (5-12m).
Ends: Flat, Beveled, Stepped.
Manufacturing Method
DIN 17175 St45.8 seamless steel pipes can be produced by hot rolling, cold rolling, hot pressing, hot drawing or cold drawing.
Steel pipes can be smelted in an open hearth or electric furnace according to the oxygen blow method, and all steel should be cast statically.
Availability
17175 St45.8 seamless steel pipe will be delivered with proper heat treatment. Heat treatment includes:
- Normalization.
- Annealing.
- Tempering; from the quenching temperature, it is not cold, but tempered.
- Adjust mass by isothermal transformation method.
|
Steel Grade |
Thermal processing ℃ | Normalizing℃ | Tempering | ||
| Grade | Material number | Quenching temperature ℃ | Tempering temperature ℃ | ||
| St45.8 | 1.0405 | 1100 to 850°C | 870-900 | – | – |
| Standard:DIN 17175 | Grade | Chemical composition(%) | |||||
| C | Si | Mn | P、S | Cr | Mo | ||
| St45.8 | ≤0.21 | 0.10-0.35 | 0.40-1.20 | ≤0.030 | / | / | |
| Grade | Tensile Strength(MPa) | Yield Strength(MPa) | Elongation(%) |
| St45.8 | 410-530 | ≥255 | ≥21 |
A thin sheet should be taken at the top end of each round or square bar ingot for a pickling test to determine if the top end is adequately cut. Ultrasonic testing can also be performed on the shrinkage hole as selected by the supplier.
Test:
Chemical composition verification test
hydrostatictest
Tensile test
Notched impact test
Yield strength test
Ring test
Nondestructive testing
Tube Flag
All steel pipes submitted for testing and acceptance shall be marked on the left and right sides of the pipe end at 300 mm. The mark is usually a number. Thin-walled tubes can also be used in other forms.
Marking and ordering
The steel grade or material number should be written to the abbreviation of the product as shown in the following example:
Example 1:
A DIN 17175 outer diameter 63mm, wall thickness 2.5 mm mm steel grade ST45.8 material, number 1.03 0 5 seamless steel pipe whose name is written: steel pipe DIN 17175-ST45.8 – 63 × 2.5 or steel pipe DIN 17175 -1.0305 – 63 × 2 . 5.
Product detail pictures:
Related Product Guide:
continue on to further improve, to make sure product top quality in line with market and consumer standard requirements. Our firm has a excellent assurance program have already been established for PriceList For Schedule 40 Carbon Black Steel Pipe - DIN 17175 ST45.8 Seamless Steel Tubes – Haihui, The product will supply to all over the world, such as: Malta, New Zealand, Frankfurt, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.
By Marco from Malaysia - 2018.02.12 14:52
High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
By Nelly from Philadelphia - 2017.07.07 13:00
