Quenched and Tempered Mechanical 27SiMn AlloySteel Pipe for High Pressure Hydraulic Jacks and Lifting Jacks
Short Description:
27SiMn steel pipes are widely used in automobile, petroleum, chemical and shipping industries. 27SiMn steel pipe is normalized and tempered, and coated with phosphate inside and outside. This steel pipe is mainly used in the quenched and tempered state to manufacture hot stamping parts (hydraulic parts) requiring high toughness and wear resistance, and hot stamping parts requiring high toughness and wear resistance.
27SiMn seamless steel pipe has high hardenability, the critical hardenability diameter in water is 8~22mm, good machinability, medium cold deformation plasticity and weldability; In addition, the toughness of the steel pipe is not much reduced during heat treatment, but it has quite high strength and wear resistance, especially in water quenching.
We believe that extended time period partnership can be a result of high quality, worth added service, wealthy knowledge and personal contact for Quenched and Tempered Mechanical 27SiMn AlloySteel Pipe for High Pressure Hydraulic Jacks and Lifting Jacks, Currently, we are seeking ahead to even bigger cooperation with abroad buyers determined by mutual benefits. Please sense absolutely free to contact us for more details.
We believe that extended time period partnership can be a result of high quality, worth added service, wealthy knowledge and personal contact for China 27SiMn Alloy Machining Pipe and Seamless Steel Tube, Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound merchandise with good logistics service and economical cost. Depending on this, our goods are sold very well in the countries in Africa, the Mid-East and Southeast Asia.
|
Elements |
Min.（≥） |
Max.（≤） |
|
C |
0.24 |
0.32 |
|
Si |
1.10 |
1.4 |
|
Mn |
1.10 |
1.4 |
|
P |
|
0.035 |
|
S |
|
0.035 |
|
Cu |
|
0.3 |
|
Cr |
|
0.3 |
|
Ni |
|
0.3 |
|
Mo |
|
0.15 |
|
Tensile strength |
565～855 |
σb/MPa |
|
Yield Strength |
200 |
σ 0.2 ≥/MPa |
|
Elongation |
14 |
δ5≥(％) |
|
ψ |
- |
ψ≥(％) |
|
Akv |
- |
Akv≥/J |
|
HBS |
051～698 |
- |
|
HRC |
30 |
|
Thermal expansion |
68-30 |
e-6/K |
|
Thermal conductivity |
93-72 |
W/m.K |
|
Specific heat |
450-460 |
J/kg.K |
|
Melting temperature |
2384-8458 |
째C |
|
Density |
2244-1217 |
kg/m3 |
|
Resistivity |
0.50-0.60 |
Ohm.mm2/m |
|
Annealing |
Quenching |
Tempering |
Normalizing |
Q & T |
|
√ |
√ |
√ |
√ |
√ |
We believe that extended time period partnership can be a result of high quality, worth added service, wealthy knowledge and personal contact for Quots for Quenched and Tempered Mechanical Steel Pipe for High Pressure Hydraulic Jacks and Lifting Jacks, Currently, we are seeking ahead to even bigger cooperation with abroad buyers determined by mutual benefits. Please sense absolutely free to contact us for more details.
Quots for China 27SiMn Alloy Machining Pipe and Seamless Steel Tube, Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound merchandise with good logistics service and economical cost. Depending on this, our goods are sold very well in the countries in Africa, the Mid-East and Southeast Asia.
