St52 Pipe Tubes St52 Honed Tube Cylinder ASTM Carbon Hot Rolled Seamless Steel Pipes
Short Description:
27SiMn steel pipes are widely used in automobile, petroleum, chemical and shipping industries. 27SiMn steel pipe is normalized and tempered, and coated with phosphate inside and outside. This steel pipe is mainly used in the quenched and tempered state to manufacture hot stamping parts (hydraulic parts) requiring high toughness and wear resistance, and hot stamping parts requiring high toughness and wear resistance.
27SiMn seamless steel pipe has high hardenability, the critical hardenability diameter in water is 8~22mm, good machinability, medium cold deformation plasticity and weldability; In addition, the toughness of the steel pipe is not much reduced during heat treatment, but it has quite high strength and wear resistance, especially in water quenching.
Persisting in “High quality, Prompt Delivery, Aggressive Price”, we have established long-term cooperation with clientele from both equally overseas and domestically and get new and old clients’ higher comments for St52 Pipe Tubes St52 Honed Tube Cylinder ASTM Carbon Hot Rolled Seamless Steel Pipes, We just not only offer the good quality to our clients, but more even important is our greatest support along with the competitive cost.
Persisting in “High quality, Prompt Delivery, Aggressive Price”, we have established long-term cooperation with clientele from both equally overseas and domestically and get new and old clients’ higher comments for China Carbon Steel Seamless Pipe and Seamless Carbon Steel Pipe, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don’t need to waste time shopping around.
Elements |
Min.(≥) |
Max.(≤) |
C |
0.24 |
0.32 |
Si |
1.10 |
1.4 |
Mn |
1.10 |
1.4 |
P |
|
0.035 |
S |
|
0.035 |
Cu |
|
0.3 |
Cr |
|
0.3 |
Ni |
|
0.3 |
Mo |
|
0.15 |
Tensile strength |
565~855 |
σb/MPa |
Yield Strength |
200 |
σ 0.2 ≥/MPa |
Elongation |
14 |
δ5≥(%) |
ψ |
- |
ψ≥(%) |
Akv |
- |
Akv≥/J |
HBS |
051~698 |
- |
HRC |
30 |
Thermal expansion |
68-30 |
e-6/K |
Thermal conductivity |
93-72 |
W/m.K |
Specific heat |
450-460 |
J/kg.K |
Melting temperature |
2384-8458 |
째C |
Density |
2244-1217 |
kg/m3 |
Resistivity |
0.50-0.60 |
Ohm.mm2/m |
Annealing |
Quenching |
Tempering |
Normalizing |
Q & T |
√ |
√ |
√ |
√ |
√ |
Persisting in “High quality, Prompt Delivery, Aggressive Price”, we have established long-term cooperation with clientele from both equally overseas and domestically and get new and old clients’ higher comments for OEM/ODM China Sermac Coil API Vagt St52 Pipe Tubes St52 Honed Tube Cylinder ASTM Carbon Hot Rolled Seamless Steel Pipes, We just not only offer the good quality to our clients, but more even important is our greatest support along with the competitive cost.
OEM/ODM China China Carbon Steel Seamless Pipe and Seamless Carbon Steel Pipe, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don’t need to waste time shopping around.