Trending Products Support Customized Size ASTM A106 Hot Rolled Black Carbon Steel Seamless Steel Tube
Short Description:
GB 3087 20# seamless steel tubes is widely used for manufacturing heating-pipeliners, containers, steaming pipeliners of low-medium pressure boilers.
Our crew through skilled training. Skilled expert knowledge, solid sense of service, to meet the service needs of customers for Trending Products Support Customized Size ASTM A106 Hot Rolled Black Carbon Steel Seamless Steel Tube, To acquire a consistent, profitable, and constant growth by getting a competitive advantage, and by continuously increasing the value added to our shareholders and our employee.
Our crew through skilled training. Skilled expert knowledge, solid sense of service, to meet the service needs of customers for China Seamless Steel Pipe and Carbon Seamless Steel Pipe, You should feel cost-free to send us your specs and we’ll respond to you asap. We have got a skilled engineering team to serve for the every single in depth needs. Free samples may be sent in your case personally to know far more facts. So that you can meet your desires, make sure you truly feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
Manufacture: Seamless process ,Hot-finished or Cold-finished.
Wall thickness(WT): 3.2 mm——21 mm.
Outer diameter (OD): 33 mm——323 mm.
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Treaded.
Port of Shipment: Tianjin, China.
Payment Terms:T / T, LC.
Delivery: 7-15 days after payment.
Surface: Tubes will be varnished (Outside only) to prevent rust.
Marking: Standard + Steel Grade + Size + Heat No + Lot No.
Package: Bundles (hexagonal),Wooden Boxes,Crates (steel/wooden) or as required.
(1)Method of manufacturing steel
Steel are manufactured by electric furnace, oxygen converter or open hearth method.
(2)Manufacturing method of tube blank
The tube blank can be produced by a hot rolling method, and a continuous casting billet or a steel ingot can also be used.
(3)Manufacturing method of steel pipe
The steel pipe can be manufactured by a hot rolling (extrusion, expansion) or cold drawing (rolling) seamless method.
|
Standard |
Steel Grade |
C |
Si |
Mn |
S |
P |
Cr |
|
GB 3087 |
10 |
0.07-0.13 |
0.17-0.37 |
0.35-0.65 |
0.02 |
0.025 |
≤0.15 |
|
20 |
0.17-0.23 |
0.17-0.37 |
0.35-0.65 |
0.02 |
0.025 |
≤0.25 |
|
Standard |
Steel pipe |
Wall thickness |
Tensile strength |
Yield Strength |
Elongation |
|
(mm) |
(MPa) |
(MPa) |
% |
||
|
|
|
≥ |
|||
|
GB3087 |
10 |
/ |
335-475 |
195 |
24 |
|
20 |
＜15 |
410-550 |
245 |
20 |
|
|
≥15 |
225 |
||||
|
Type of steel pipe |
Outer diameter(mm) |
Tolerance |
||
|
ordinary |
advanced |
|||
|
Hot rolled tube |
OD |
≤159 |
±10%（min±0.50mm） |
±0.75%(min±0.40mm) |
|
＞159 |
±1.0% |
±0.90% |
||
|
WT |
≤20 |
＋15.0%(min＋0.45mm) |
±10%（min±0.30mm) |
|
|
＞20 |
±12.5% |
±10% |
||
|
OD≥351 |
±15% |
|||
|
Cold drawn tube |
OD |
10～30 |
±0.40mm |
±0.20mm |
|
＞30～50 |
±0.45mm |
±0.25mm |
||
|
＞50 |
±1.0% |
±0.75% |
||
|
WT |
1.5～3.0 |
+15% |
±10% |
|
|
＞3.0 |
+12.5% |
±10% |
||
(1)Hydraulic test
The steel pipe should be hydraulically tested one by one.
(2)Flattening test
Steel pipes with an outer diameter of more than 22mm to 400mm and a wall thickness of not more than 10mm shall be subjected to a flattening test.
(3)Flaring test
The steel pipe with a wall thickness of not more than 8 mm can be subjected to a flare test with a top taper of 30°, 45° or 60°.
(4) Bending test
Steel pipes with an outer diameter of not more than 22 mm will be subjected to a bending test.
(5)Non-destructive testing
According to the requirements of the purchaser, the steel pipe will be ultrasonically tested one by one.
The inner and outer surfaces of the steel pipe do not have cracks, folds, creases, crusting or separation, and these defects should be completely removed. The clearance depth shall not exceed the negative deviation of the nominal wall thickness, and the actual wall thickness at the cleaning site shall not be less than the minimum allowed by the wall.
The packaging, marking and quality specifications of steel pipes shall comply with the provisions of GB/T 2102.
Our crew through skilled training. Skilled expert knowledge, solid sense of service, to meet the service needs of customers for Trending Products Support Customized Size ASTM A106 Hot Rolled Black Carbon Steel Seamless Steel Tube, To acquire a consistent, profitable, and constant growth by getting a competitive advantage, and by continuously increasing the value added to our shareholders and our employee.
Trending Products China Seamless Steel Pipe and Carbon Seamless Steel Pipe, You should feel cost-free to send us your specs and we’ll respond to you asap. We have got a skilled engineering team to serve for the every single in depth needs. Free samples may be sent in your case personally to know far more facts. So that you can meet your desires, make sure you truly feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
